All lines and hoses, sensor cables - checking tightness and condition

AP00.20-T-0051B

All lines and hoses, sensor cables - checking tightness and condition

9.1.08



Checking

1

Inspect all lines and hoses of the brake system as well as all other lines and hoses for oil, brake fluid, fuel, coolant and compressed air to determine whether leaks can be seen or heard

Check lines and hoses for leaks and damage or other conditions which prevent continued use (e.g. corrosion, porosity, chafing marks etc.).
If damage/defects are found:
Eliminate damage/defects
- subject to a separate repair order.

2

Check that all lines and hoses as well as sensor cables for ABS and brake lining wear indicators are installed and secured properly and free of chafing.

With code B02.

If damage/defects are found:
Eliminate damage/defects
- subject to a separate repair order.

3

Check pressure loss in the compressed air system; release the parking brake before commencing this

Take appropriate measures to prevent vehicle from rolling away.
If a considerable amount of pressure is being lost, 
locate and remedy cause
- against separate order.

*BE42.10-N-1002-10F

Number

Designation

Models 613.364/ 365
with VOSE front axle

Model 613. 364/ 365
with rear axle HOSE

BE42.10-N-1002-10F

Pressure loss

bar

0.1

0.1