ap0020b0022a

Lubricate rim bearing

Type ap · emne 00.20 · version 0200 · 2016-02-12

Gælder for: Vehicle 382.153 with CODE A00 (Front axle with air suspension)Vehicle 382.154, 382.155, 382.157, 382.158 with CODE A00 (Front axle with air suspension)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 0 Samlet › 00 Samlet køretøj › 00.20 Service, servicesystemer (FSS, ASSYST) — Serie 382 (modeller 153, 154, 155, 157, 158)

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.55 kardansystem/drejeskammel › 35.55.40 Drejeskammel — Serie 382 (modeller 153, 154, 155, 157, 158)

AP00.20-B-0022A

Lubricate rim bearing

12.02.16

Vehicle 382.153 with CODE A00 (Front axle with air suspension)

Vehicle 382.154, 382.155, 382.157, 382.158 with CODE A00 (Front axle with air suspension)

Lubricate rim bearing

M55.50-0020-11

Hübner articulation

1 Articulation assembly

2 Distributor

3 Greaser

Lubricate rim bearing

B55.50-0001-01

2 Distributor

3 Greaser

In order to lubricate, use only high pressure pumps that do not exceed a 400 bar pressure

Clean

1

Before greasing, clean thoroughly the sealing laps of the spinning crown and the greaser (arrow) of the lubrication system's distributor (2)

2

Supply the lubrication system by the greaser (3) of the distributor (2) with lubrication grease

The spinning crown can be considered as well lubricated when the new grease starts to flow out by the sealing laps.

General use grease as per auxiliary materials specification.

Refer to S.I. lubricants

3

After greasing, press the sealing laps of the spinning crown and remove the excess grease