ap0020b0020c

Lubrication points

Type ap · emne 00.20 · version 0201 · 2020-03-18

Gælder for: Model 386, 682.0/1/3 Valid only for vehicles in PDI procedure Model 386 Valid only for vehicles in PDI procedure Model 693, 694, 695 Valid only for vehicles in PDI procedure

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 0 Samlet › 00 Samlet køretøj › 00.20 Service, servicesystemer (FSS, ASSYST) — Serie 386 · Serie 682 (modeller 0**, 1**, 3**) · Serie 693 · Serie 694 · Serie 695

EinPAS 45 Data/information › 45.10 hele bilen › 45.10.20 hele bilen — Serie 386 · Serie 682 (modeller 0**, 1**, 3**) · Serie 693 · Serie 694 · Serie 695

AP00.20-B-0020C

Lubrication points

11.03.2020

Model	386, 682.0/1/3
	Valid only for vehicles in PDI procedure
Model	386
	Valid only for vehicles in PDI procedure
Model	693, 694, 695
	Valid only for vehicles in PDI procedure

Lubrication points

Shaft ends

self-supporting

B33.25-0002-01

Lubrication points

Lubrication points

B32.25-0002-01

Spring pins
	Front suspension

	Rear suspension
			Not valid for L1620 (6x2) and 2428 (6x4) - Chassis 695.301 and 693.348

B32.30-0001-01

Lubrication points

Rocker - L 1620 (6x2)

B32.00-0001-01

Lubrication points

Lubrication points

Lubrication points

B41.10-0033-01

B41.10-0032-01

B41.10-0031-01

Juntas universais com flange
Eixo traseiro

Mancal intermediário

Caixa de mudanças

1	Clean grease fittings using cloth	 For lubricating through nipple greases, use only high pressure lubricating pumps which do not exceed 10 to 15 bar
2	Oil the lubrication points	 To ensure a good shaft end lubrication it is recommended to lift vehicle using front axle. If required, turn transmission shaft so the lubrication pump can correctly adapt to grease fittings. A lubrication point is considered well lubricated when new grease is shown at its contour. Wipe the exceeding grease.