Overview of pigtail wiring harness |
A | New exhaust brake switch connector |
B | S2.2 Exhaust brake switch |
C | Clutch pedal harness interconnector |
D | Relay exhaust brake A1 [A37.K5] |
E | New mini relay connector |
F | To relay A25.K3/5 |
G | To base module |
H | To CPC FR |
Y54.18-0099-06
Pigtail installation |
508 | Exhaust brake switch |
Y54.18-0100-01
Pigtail installation procedure | |||
1 | Remove exhaust brake switch (508) from existing location | Tape the exhaust switch connector S2.2 in existing harness and fill the slot with dummy. | |
2 | Add new pigtail harness as per the “from and to” circuits given in the pigtail harness diagram | ||
3 | Install A25.K3 relay base circuit | ||
| |||
4 | Install base module circuit | ||
| |||
5 | Install CPC circuit | ||
| |||
6 | Install A37.K5 relay base circuit | ||
| |||
7 | Install imported X208 clutch harness | ||
| |||
8 | Install combination switch | ||
| |||
9 | Install S2.2 Over ride switch | ||
|