an2910p0002cw
Retrofit pedal pads
Type an · emne 29.10 · version 0103 · 2020-02-07
Gælder for: Model 204.0## (except 204.077) 1# , 204.2## (except 204.277) 1# , 204.3## (except 204.377) 1# except code 950 (AMG sport package) Model 204.9## 1# as of 7/31/12 except code P95 (Interior Sports package)
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 29 Pedalsystem › 29.10 Pedaler, lejebuk — Serie 204 (modeller 000, 001, 002, 003, 006, 007, 008, 022, 023, 025, 031, 041, 044, 045, 046, 047, 048, 049, 052, 054, 055, 056, 057, 065, 080, 081, 082, 084, 085, 087, 088, 089, 092, 200, 201, 202, 203, 207, 208, 222, 223, 225, 231, 241, 245, 246, 247, 248, 249, 252, 254, 256, 257, 282, 284, 289, 292, 302, 303, 331, 347, 348, 349, 357, 388, 9**)
EinPAS 15 Motor › 15.45 Motorstyring › 15.45.3 eftermontering/ombygning — Serie 204 (modeller 000, 001, 002, 003, 006, 007, 008, 022, 023, 025, 031, 041, 044, 045, 046, 047, 048, 049, 052, 054, 055, 056, 057, 065, 080, 081, 082, 084, 085, 087, 088, 089, 092, 200, 201, 202, 203, 207, 208, 222, 223, 225, 231, 241, 245, 246, 247, 248, 249, 252, 254, 256, 257, 282, 284, 289, 292, 302, 303, 331, 347, 348, 349, 357, 388, 9**)
EinPAS 17 Drivstreng/aksel › 17.15 Kobling › 17.15.3 eftermontering/ombygning — Serie 204 (modeller 000, 001, 002, 003, 006, 007, 008, 022, 023, 025, 031, 041, 044, 045, 046, 047, 048, 049, 052, 054, 055, 056, 057, 065, 080, 081, 082, 084, 085, 087, 088, 089, 092, 200, 201, 202, 203, 207, 208, 222, 223, 225, 231, 241, 245, 246, 247, 248, 249, 252, 254, 256, 257, 282, 284, 289, 292, 302, 303, 331, 347, 348, 349, 357, 388, 9**)
EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.3 eftermontering/ombygning — Serie 204 (modeller 000, 001, 002, 003, 006, 007, 008, 022, 023, 025, 031, 041, 044, 045, 046, 047, 048, 049, 052, 054, 055, 056, 057, 065, 080, 081, 082, 084, 085, 087, 088, 089, 092, 200, 201, 202, 203, 207, 208, 222, 223, 225, 231, 241, 245, 246, 247, 248, 249, 252, 254, 256, 257, 282, 284, 289, 292, 302, 303, 331, 347, 348, 349, 357, 388, 9**)
EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.16 Parkeringsbremse › 21.16.3 eftermontering/ombygning — Serie 204 (modeller 000, 001, 002, 003, 006, 007, 008, 022, 023, 025, 031, 041, 044, 045, 046, 047, 048, 049, 052, 054, 055, 056, 057, 065, 080, 081, 082, 084, 085, 087, 088, 089, 092, 200, 201, 202, 203, 207, 208, 222, 223, 225, 231, 241, 245, 246, 247, 248, 249, 252, 254, 256, 257, 282, 284, 289, 292, 302, 303, 331, 347, 348, 349, 357, 388, 9**)
AN29.10-P-0002CW
| Retrofit pedal pads
| 07.02.2020
|
Model
| 204.0## (except 204.077) 1# , 204.2## (except 204.277) 1# , 204.3## (except 204.377) 1#
|
|
| except code 950 (AMG sport package)
|
Model
| 204.9## 1# as of 7/31/12
|
|
| except code P95 (Interior Sports package)
|
Shown on vehicle with transmission 722
|
1
| Stainless steel pedal cover
|
| 3
| Stainless steel pedal cover
|
| 5
| Brake pedal
|
2
| Stainless steel pedal cover
|
| 4
| Parking brake pedal
|
| B37
| Accelerator pedal sensor
|
| Remove
|
|
|
1
| Remove accelerator pedal sensor (B37)
|
|
|
|
|
| AR30.12-P-1321CW
|
|
|
| The accelerator pedal sensor (B37) with its pedal cover is no longer required.
|
|
2
| Remove pedal rubber support of foot-operated parking brake pedal (4)
| The pedal rubber support of the parking brake pedal (4) is no longer required.
|
|
3
| Remove pedal rubber support of the clutch pedal
| For transmission 711 and 716
|
|
|
|
| The pedal rubber support of the clutch pedal is no longer required.
|
|
4
| Remove pedal rubber support of brake pedal (5)
| The pedal rubber support of the brake pedal (5) is no longer required.
|
|
| Install
|
|
|
5
| Install accelerator pedal sensor (B37) with stainless steel support (3)
|
|
|
|
|
| AR30.12-P-1321CW
|
6
| Attach stainless steel pedal support (1) to parking brake pedal (4) in lower area (arrow B) and invert clockwise over the parking brake pedal (4)
|
Do not use lubricants when installing.
Otherwise the firm seating of the stainless steel pedal assembly (1) will not be assured.
|
|
7
| Attach stainless steel pedal support to clutch pedal in the lower area and invert clockwise over the clutch pedal
| For transmission 711 and 716
|
|
|
|
|
Do not use lubricants when installing.
Otherwise the firm seating of the stainless steel pedal assembly will not be assured.
|
|
8
| Attach stainless steel pedal support (2) to the brake pedal (5) in the lower area (arrow B) and invert clockwise over the brake pedal (5)
|
Do not use lubricants when installing.
Otherwise the firm seating of the stainless steel pedal assembly (2) will not be assured.
|
|
9
| Document retrofitted equipment via vehicle documentation (VeDoc)
| Attach "Stainless steel pedal covers as per AN29.10-P-0002CW" note under field organization texts to design group 29.
|
|
Part no.
| Designation
| Quantity
|
KG99 (siehe EPC)
| Interior compartment equipment
| 1
|
Henviste dokumenter
