000 589 13 99 00
Wiring harness repair kit, basic
New passenger vehicle wiring harness repair kit
220 589 04 99 00
D07.00-1118-06
Routing diagram
1 Fuse
3 Fuel preheating system wiring harness connector/fuel preheating control unit
4 Fuel preheating control unit
5 Fuel preheating system wiring harness connector/main fuel filter
6 Main fuel filter
16 Connector H1 for fuse/relay box (SRB)
17 Electrical connection for fuel preheating wiring harness/ fuse/relay box (SRB)
30 Fuel preheating wiring harness connector/water separator
K40/9 Fuse/relay box (SRB)
W9/7 Left front ground point 2
X4/47 Circuit. 30 battery
31 Water separator/fuel preheating connector
D07.00-1105-06
Connection scheme
1 Fuse
3 Fuel preheating system wiring harness connector/fuel preheating control unit
4 Fuel preheating control unit
5 Fuel preheating system wiring harness connector/main fuel filter
6 Main fuel filter
16 Connector H1 for fuse/relay box (SRB)
17 Electrical connection for fuel preheating wiring harness/ fuse/relay box (SRB)
30 Fuel preheating wiring harness connector/water separator
K40/9 Fuse/relay box (SRB)
W9/7 Left front ground point 2
X4/47 Circuit. 30 battery
31 Water separator/fuel preheating connector
D07.00-1106-06
1 Route fuel preheating electrical wiring harness (7) in engine compartment.
2 Route fuel preheating electrical wiring harness (7) out of the engine compartment through the grommet (8) into the vehicle interior.
Use a pulling through aid if necessary.
D07.00-1107-09
3 Route fuel preheating electrical wiring harness (7) along the broken line.
D07.00-1108-06
4 Route fuel preheating electrical wiring harness (7) along the broken line.
5 Hook locking clip (1) for the fuel preheating electrical wiring harness (7) in the bracket (20).
D07.00-1109-06
6 Route fuel preheating electrical wiring harness (7) along the broken line.
D07.00-1119-01
7 Remove guide (broken line) on the fuel preheating wiring harness connector/water separator (30) for the fuel preheating electrical wiring harness (7).
D07.00-1121-06
8 Attach fuel preheating system wiring harness connector/main fuel filter (5) to main fuel filter (6).
9 Connect fuel preheating system wiring harness connector/water separator (30) and the water separator/fuel preheating connector (31) and fix together with cable ties.
D07.00-1111-08
10 Remove cable tie (9).
11 Screw down fuel preheating control unit (4) with bracket (10), bolt (11) and nut.
12 Fix electrical line (13) with a cable tie (12) to bracket (10).
13 Clip in fuel preheating system wiring harness connector/fuel preheating control unit (3) to fuel preheating control unit (4).
D07.00-1112-09
14 Tighten down ground line (14) for fuel preheating electrical wiring harness (7) on ground point at the front left 2 (W9/7).
D07.00-1113-06
15 Unhitch line (21) from slot 18 (18) for connector H1 for the fuse/relay box (SRB) (16).
16 Connect line (21) in the connector for the fuel preheating wiring harness electrical connection/fuse/relay box (SRB) (17) .
17 Connect line (19) for the fuel preheating electrical wiring harness (7) in slot 18 (18) of the connector H1 for the fuse/relay box (SRB) (16).
D07.00-1114-06
18 Attach positive line of the fuel preheating electrical wiring harness (7) to battery circuit 30 (X4/47) of the battery (G1).
D07.00-1115-09
19 Fix fuel preheating electrical wiring harness (7) in place using cable ties (arrows).
D07.00-1116-08
20 Fix fuel preheating electrical wiring harness (7) in place using a suitable felt band (arrows).
D07.00-1117-08
21 Fix fuel preheating electrical wiring harness (7) in place using cable ties (arrows).