AD83.70-S-6002-02A | Heater booster test of electrical system heater unit switch on signal |
| Scope of test | Measuring instrument/ Test connection | Operation/Requirement | Specified value | Possible cause/Remedy | ||
1.0 | Cable Open-circuit |
A20.2 10 | |
A90.1 7 | Ignition: OFF A90.1 disconnected A20.2 disconnected |
< 5Ω | Open-circuit Connection to J108 (code HZ5 only) 1.1 |
1.1 | Short-circuit to ground |
| A90.1 |
7 | Ignition: OFF A90.1 disconnected A20.2 disconnected |
> 20kΩ | Short-circuit to ground 1.2 |
1.2 | Short-circuit to positive |
| A90.1 |
7 | Ignition: OFF A90.1 disconnected A20.2 disconnected Ignition: ON |
< 1 V | Short-circuit to positive 1.3 |
1.3 | Switch-on signal from climate control pushbutton control unit (A20) Signal |
| A20.2 |
10 | Remove Bowden cable from climate control pushbutton control unit Without disconnecting, measure on the rear side of the connector A20.2 Press heater booster switch (A20s6) Press heater booster switch (A20s6) again |
11 - 14 V approx. 1 V | Climate control pushbutton control unit (A20) Value in order Heater booster A90 |