S82.57-0008-01
The fault memory can only be read and erased using the Hand-held Tester.
The contents of the fault memory are only updated when switched or activated.
Fault memory
After calling up the "fault memory" menu item, the numbers of the fault codes stored in the control module are displayed, together with the associated fault texts.
The fault is current if it appears on a black background (see adjacent illustration).
Procedure for current faults:
Deal with fault as described in electrical system testing program section.
Procedure for stored faults:
Erase fault memory, activate and deactivate DAS in the usual way and read out the fault memory again. If the fault has been stored again, deal with fault as described in electrical system testing program section.
Injection system:
PEC fuel injection and ignition system
Data transmission by:
PWM pulse width modulation
Diagnosis capability:
NO
Injection system:
In-line injection pump M/RSF with shutoff valve
DSV drive authorization system
Data transmission by:
CAN data bus
Diagnosis capability:
YES