Remote central locking (RCL) diagnosis fault memory

AD80.30-P-4000A

21.11.97

MODEL 170, 129 up to 31.5.97,
140 as of 1.6.96 up to 31.5.97,
202.083 except CODE (491) USA version

MODEL 210.072 up to 31.5.96 with CODE (491) USA version

MODEL 202 (except 202.083) as of 1.8.96,
210 (except 210.072) as of 1.6.96,
210.2

	Remote central locking (RCL) diagnosis, basic knowledge		AD80.30-P-2000A
	Fuses in order
	Battery voltage > 11 V
	Vehicle unlocked via RCL
	Ignition: ON
	Connect Hand-Held Tester in accordance with connecting diagram	 The fault memory can only be read out and erased with the Hand-Held Tester.	AD00.00-P-2003A
	Fault memory
Fault code 	Possible cause		Remedy/Test step
	IR DAS control module (N54/1)		Replace N54/1
	Control line signal when unlocking,  + or   –		Model 129: AD80.30-P-6000-05A AD80.30-P-6000-05B AD80.30-P-6000-05E AD80.30-P-6000-05F Models 140, 202: AD80.30-P-6000-05A AD80.30-P-6000-05B Models 170, 210: AD80.30-P-6000-05G AD80.30-P-6000-05H
	Control line signal when locking,  + or   –		Model 129: AD80.30-P-6000-05E AD80.30-P-6000-05F Models 140, 202: AD80.30-P-6000-05C AD80.30-P-6000-05D Models 170, 210: AD80.30-P-6000-05G AD80.30-P-6000-05H
	Red visual feedback lamp,  + or   –		AD80.30-P-6000-02C
	Green visual feedback lamp,  + or   –		AD80.30-P-6000-02D
	Incorrect enable code for engine control (CAN)		Models 129, 140 AD80.30-P-3000A Models 170, 202, 210: AD80.30-P-3000B
	Incorrect enable code for left cylinder bank (CAN)		Models 129, 140 AD80.30-P-3000A Models 170, 202, 210: AD80.30-P-3000B
	Transponder invalid		IR transmitter key defective - replace Erase fault memory
	Transponder coil, power could not be built up		AD80.30-P-6000-06A AD80.30-P-6000-06B
	Actuation of lock confirmation relay or time function relay ,  + or   –		AD80.30-P-6000-03B AD80.30-P-6000-03C

Henviste dokumenter