ad4680w200101b

Notes on reading out the diagnostic fault code memory

Type ad · emne 46.80 · version 0101 · 2003-06-10

Gælder for: MODEL 950.203 /204 /205 with REAR AXLE 749.109 with CODE (AN9) Hydraulically steered trailing axle beim Einlernvorgang

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 46 Styretøj › 46.80 Bagakselstyretøj, ekstra styreaksel (ZL), elektronisk-hydraulisk ekstra styretøj (EHZ) — Serie 950 (modeller 203, 204, 205)

EinPAS 22 Styretøj › 22.20 Ekstra styretøj › 22.20.1 Grundinformation — Serie 950 (modeller 203, 204, 205)

Gælder også for motorer/gearkasser: 749 109

AD46.80-W-2001-01B

Notes on reading out the diagnostic fault code memory

Flash code/fault code for the teach-in process

Reading out the diagnostic fault code memory:

If a malfunction occurs during the teach-in process, the EHZ control unit outputs a corresponding flash code via the EHZ indicator lamp.

1 Display the fault codes stored in the EHZ control unit.
The EHZ indicator lampin the instrument now flashes once or several times, according to the fault codes which have been stored.
The display of the fault code is followed by a pause of
approximately 5 s (EHZ indicator lamp off), after which the fault is displayed once again (endless loop).

Following the rectification of the malfunction, the teach-in process must be restarted and carried out completely.

If necessary, the teach-in process must be repeated until no further malfunction occurs.