ESP and SPS test of electrical system steering angle sensor

Type ad · emne 42.45 · version 0100 · 2003-06-10

Gælder for: MODEL 129 with ENGINE 104, 119, 120 with CODE (472a) Electronic-Stability-Program (ESP) MODEL 140 with CODE (472a) Electronic-Stability-Program (ESP) MODEL 210 with ENGINE 119 with CODE (472a) Electronic-Stability-Program (ESP)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.45 Elektronisk stabilitetsprogram (ESP), stabilitetsregulering (SR) — Serie 129 · Serie 140 · Serie 210

EinPAS 22 Styretøj › 22.15 Servostyring › 22.15.1 Grundinformation — Serie 129 · Serie 140 · Serie 210

EinPAS 26 Aktive sikkerhedssystemer › 26.20 Bremse-/traktionsregulering › 26.20.1 Grundinformation — Serie 129 · Serie 140 · Serie 210

Gælder også for motorer/gearkasser: 104 ***, 119 ***, 120 ***

AD42.45-P-6001-26A

ESP and SPS test of electrical system steering angle sensor

 	Scope of test	Measuring instrument/ Test connection			Operation/Requirement	Specified value	 Possible cause/Remedy

1.0   	Steering angle sensor (N49)				Engine: Idling Steering in center position Turn steering slowly as far as left stop Turn steering slowly as far as right stop	° Value changes continuously	 Cables  1.1  ESP control module (N47-5)
1.1	Voltage supply, terminal 30	2 	N49x1 	4	Ignition: OFF Disconnect steering angle sensor connector N49x1	11–14 V	 Cables
1.2	Voltage supply, terminal 87	2 	N49x1 	3	Ignition: ON	11–14 V	 Cables