ESP and SPS test of electrical system right rear speed sensor output
Type ad · emne 42.45 · version 0100 · 2003-06-10
Gælder for: MODEL 129 with ENGINE 104, 119, 120 with CODE (472a) Electronic-Stability-Program (ESP) MODEL 140 with CODE (472a) Electronic-Stability-Program (ESP) MODEL 210 with ENGINE 119 with CODE (472a) Electronic-Stability-Program (ESP)
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.45 Elektronisk stabilitetsprogram (ESP), stabilitetsregulering (SR) — Serie 129 · Serie 140 · Serie 210
EinPAS 26 Aktive sikkerhedssystemer › 26.20 Bremse-/traktionsregulering › 26.20.1 Grundinformation — Serie 129 · Serie 140 · Serie 210
Gælder også for motorer/gearkasser: 104 ***, 119 ***, 120 ***
AD42.45-P-6001-19A
ESP and SPS test of electrical system right rear speed sensor output
Scope of test
Measuring instrument/ Test connection
Operation/Requirement
Specified value
Possible cause/Remedy
1.0
Right rear axle VSS sensor output
57
(2.23)
N47–5
4
(1.4)
Raise vehicle at rear
Ignition: ON
Turn right rear wheel by hand (>1/second)
>3 V
1.1
ESP control module
(N47-5)
1.1
Load due to connected control modules
57
(2.23)
N47–5
4
(1.4)
Ignition: OFF
Disconnect N47-5
>5 kΩ
Cables
Connected control modules (refer to wiring diagram)