ad0761p600209a

Pedal value sensor signal 2 - Check ME-SFI idle speed control/electronic accelerator electrics

Type ad · emne 07.61 · version 0101 · 2003-06-10

Gælder for: ENGINE 104.941 /943 /944 /991 /994 as of 1.8.96 ENGINE 104.995 with CODE (494a) USA version with CODE (807) Model year 1997 with CODE (808) Model year 1998 with CODE (498) as of Model Year 97 Japanese version ENGINE 111.921 /942 as of 1.9.98, 111.943, 111.944 as of 1.8.96, 111.946 as of 1.6.98, 111.947 /973, 111.975 as of 1.8.96 ENGINE 111.945 in MODEL 208.335 /435 as of 1.6.98, 202.020 /080 as of 1.9.98 ENGINE 111.974 with CODE (494a) USA version with CODE (807) Model year 1997 with CODE (80

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.61 Benzinindsprøjtnings- og tændingssystem ME — Serie 202 (modeller 020, 080) · Serie 208 (modeller 335, 435)

EinPAS 15 Motor › 15.45 Motorstyring › 15.45.1 Grundinformation — Serie 202 (modeller 020, 080) · Serie 208 (modeller 335, 435)

Gælder også for motorer/gearkasser: 104 941, 104 943, 104 944, 104 991, 104 994, 104 995, 111 921, 111 942, 111 943, 111 944, 111 945, 111 946, 111 947, 111 973, 111 974, 111 975

AD07.61-P-6002-09A

Pedal value sensor signal 2 - Check ME-SFI idle speed control/electronic accelerator electrics

Scope of test

Tester/test connection

Operation/

prerequisite:

Specified value

Possible cause/

remedy

1.0

Pedal value sensor (B37)

Signal 2

18

(26C)

N3/10

17

(25C)

Ignition: ON

Accelerator pedal position:

Idle speed:

Full throttle/kick-down:

0.1 - 0.4 V

2.1 - 2.5 V

1.1

Lead

Pedal value sensor (B37)

1.1

Nominal value potentiometer 2 voltage supply

Test step is dispensed with in the case of a pedal value sensor with hall principle

18

(26C)

N3/10

19

(27C)

Ignition: ON:

2.25 - 2.75 V

Lead

ME-SFI control
module (N3/10)