ad0761p400032a

Fault code description - ME-SFI - CAN fault identification

Type ad · emne 07.61 · version 0104 · 2003-06-06

Gælder for: ENGINES 112.910, 112.911 up to 31.5.00, 112.920, 112.921 up to 31.5.00, 112.923, 112.940 /941 /942 up to 31.5.00, 112.943 ENGINES 113.940 /942 /943 up to 31.5.00, 113.961 ENGINES 112.945, 113.962 up to 30.11.00 in MODEL 463

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.61 Benzinindsprøjtnings- og tændingssystem ME — Serie 463

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.15 netværk/multifunktion › 25.15.1 Grundinformation — Serie 463

Gælder også for motorer/gearkasser: 112 910, 112 911, 112 920, 112 921, 112 923, 112 940, 112 941, 112 942, 112 943, 112 945, 113 940, 113 942, 113 943, 113 961, 113 962

AD07.61-P-4000-32A

Fault code description - ME-SFI - CAN fault identification

1

Fault code

2

Fault storage

Activation of malfunction indicator lamp for engine diagnosis (EURO3/4)

or CHECK ENGINE (MIL)

after the end of the test period and faults

after two successive driving cycles with faults

3

Frequency of the test

continuous

4

Checked signal or status

The ETC control module monitors the plausibility of the wheel speed signals from the control module for ASR and ESP (for Model 463: ABS control module) via the CAN data bus.

5

Test duration

approx. 1 s

6

Faults are detected by the ETC control module and sent via the CAN data bus to the ME-SFI control module. The faults are stored and the malfunction indicator lamp is activated by the ME-SFI control module. Also read out ETC diagnostic trouble code memory, fault codes 22, 23, 38.