AD07.52-S-6010-02A | PEC test of control module programming transmission recognition |
| Scope of test | Measuring instrument/ | Operation/Requirement | Specified value | Possible cause/Remedy | ||
1.0 | Manual/automatic transmission not recognized or incorrectly recognized Ground coding (manual transmission only) |
| |
5 (1.5) | Ignition: OFF Coupling "1" disconnected at control module |
< 5 Ω | Cable Ground connection at W16 1.2 |
1.1 | Recognition of selector lever position P/N (automatic transmission only) |
| |
5 (1.5) | Operate starter Coupling "1" disconnected at control module Selector lever position: P/N R/D/3/2 |
11-14 V < 1 V | Cables Automatic transmission starter lock-out switch 1.2 |
1.2 | Vehicle speed signal | | Drive at v > 10 km/h Control module programming | Manual or automatic transmission recognized | Work through test steps of fault code | ||