AD07.52-S-6000-17A | PEC fuel injection and ignition system test of electrical system crankshaft position sensor |
| Scope of test | Measuring instrument/ | Operation/Requirement | Specified value | Possible cause/Remedy | ||
1.0 | Crankshaft position sensor and magnet for position sensor on flywheel sector Not recognized/implausible Magnet missing Speed implausibly high Voltage |
35 (3.1) 35 (3.1) | |
36 (3.2) 36 (3.2) | Engine: Idling Operate starter (Engine does not start) Disconnect test coupling 3 (crankshaft position sensor) at control module. Engine: Idling (Complaint with engine running, for example misfire at high speed) | > 0.4 V (Increasing speed, increasing voltage) | 1.1 Sectors or magnet for position sensor Crankshaft position sensor not fitted correctly or position sensor or sectors contaminated. |
1.1 | Resistance |
35 (3.1) | |
36 (3.2) | Ignition: OFF Coupling of position sensor disconnected at control module | 680-1200 Ω | 1.2 |
1.2 | Insulation resistance |
1 (1.1) | |
36 (3.2) | Ignition: OFF Coupling of position sensor disconnected at control module | > 30 kΩ | Position sensor |