ad0000p200003a

Connecting Hand-Held Tester (HHT), reading out fault memory

Type ad · emne 00.00 · version 0103 · 2006-07-25

Gælder for: MODEL 124.034 /036, 129.058 /063 /067 /076, 140, 170, 202, 208, 210

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 0 Samlet › 00 Samlet køretøj › 00.00 Generelt — Serie 124 (modeller 034, 036) · Serie 129 (modeller 058, 063, 067, 076) · Serie 140 · Serie 170 · Serie 202 · Serie 208 · Serie 210

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.15 netværk/multifunktion › 25.15.1 Grundinformation — Serie 124 (modeller 034, 036) · Serie 129 (modeller 058, 063, 067, 076) · Serie 140 · Serie 170 · Serie 202 · Serie 208 · Serie 210

AD00.00-P-2000-03A

Connecting Hand-Held Tester (HHT), reading out fault memory

Commercially available tools

Number

Designation

WH58.30-Z-1036-13A

Handheld tester (HHT)

651 100 01 99

WH58.30-Z-1037-13A

Test cable (multiplexer)

651 100 40 99

Connecting Hand-Held Tester (HHT), reading out fault memory

P00.19-0411-06

1 Connect Hand-Held Tester (087) with test cable (Multiplexer) (094) to data link connector (DTC readout) (X11/4).

2 Switch on ignition.

3 According to instructions on display:

a) Read out/erase fault memory

b) Read out actual values

c) Perform actuations

d) Program control modules

4 Disconnect HHT.

087 Hand-Held Tester (HHT)

094 Test cable (Multiplexer)

X11/4 Data link connector (DTC readout)

Observe system-specific deviations which are listed for the appropriate diagnosis description in the chapter "Advanced Information on diagnosis".

Stored faults which can be caused by disconnected cables or a simulation during test work must be erased in the fault memory upon completion of the work.