ws4200n0013b

000 588 06 21 00 Roller brake test stand

Typ ws · téma 42.00 · verze 0102 · 2016-11-24

Platí pro: Model all

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 42 Brzdy - hydraulická část a mechanická část › 42.00 Všeobecné — Řada 900 (modely 9**) · Řada 902 (modely 9**) · Řada 904 (modely 918, 919, 924, 925, 938, 943, 957) · Řada 906 (modely 917, 918, 924, 953)

EinPAS 21 Brzdy/podtlakový systém/vzduchotlaké zařízení › 21.15 Provozní brzda/podtlakový systém › 21.15.1 Základní informace — Řada 900 (modely 9**) · Řada 902 (modely 9**) · Řada 904 (modely 918, 919, 924, 925, 938, 943, 957) · Řada 906 (modely 917, 918, 924, 953)

Platí také pro motory/převodovky: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

WS42.00-N-0013B

000 588 06 21 00 Roller brake test stand

09.11.2016

Model

all

000 588 06 21 00 Roller brake test stand

Verwendung in FG 42/Satz B


Purpose:
Commercial vehicle roller brake test stand for checking brake forces at wheels.
Test equipment category CAT_B.
Procurement information:
This criteria catalog is intended as an aid for selecting one of the commercially available variants of a workshop equipment item. It merely describes the minimum requirements for fulfilling the Mercedes-Benz standard. No reference is therefore made to manufacturer-specific equipment or items.

000 588 06 21 00

Minimum requirements:

International technical standard equipment for commercial vehicle brake test stand:

Roller set greater than or equal to Ø 250 mm with rideover load of at least 16 t

Roller set with usable test width of 800 to 3,000 mm

Test speeds greater than or equal to 2 km/h

Engine power: at least 2x11 kW

Protective circuit for reduction of startup current

Roller set with roller camber of approx. 50 mm on rear roller

Galvanized roller set

Plastic-coated roller surface with tire-to-road friction coefficient for tire/roller when dry 0.7/wet 0.5

Individual wheel circuit

PC with printer for printing out test log

Weighing machine in roller set

Remote control for initial startup and control of brake test stand

Switchover mode from manual to automatic mode

Automatic on/off circuit and automatic restart

Standardized data interface for data transfer (e.g. USB, LAN etc.)

Pressure transducer for transfer of measured pressures in compressed air system

Lockable main switch

Simultaneous display

Pit safety device for pit installation

Option:

Automatic roller brake for testing automatic vehicles

Preinstallation for checking recording speedometer/tachographs

Roller set lift for load simulation

Retractable aid

Supplement for use with cars:

Pedal force meter

Two test speeds = 2 to <4 km/h when used for cars

Please note the following, depending on the country:

While using ASA Life Stream, the use of a second LAN interface is required