Purpose: Car suspension measuring unit for measuring suspension geometry. Test equipment category CAT_B. Procurement information: This workshop equipment is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier are available in the maintenance system document (see below).
000 588 13 21 00
Note:
The wheel alignment systems listed here operate according to one of the following measuring methods
Electronic with 3D camera technology
Electronic with radio frequency
The suspension geometry on heavy-duty vans from Mercedes-Benz can also be measured using the wheel alignment systems listed below.
Manufacturer 1:
Beissbarth GmbH
Hanauer Str. 101
80993 Munich
Germany
https://www.beissbarth-online.com
Type/model: ML 81 R TECH
Article no.: 932 500 092
Manufacturer 2:
Corghi S.p.A.
S.S.468, n° 9
42015 Correggio Reggio Emilia
Italy
http://www.corghi.de
Type/model: Exact 7000 MB
Article no.: 0-33104601/31
Manufacturer 3:
Hunter Deutschland GmbH
Beurerstraße 25a
86926 Greifenberg am Ammersee
Germany
http://de.hunter.com/oem/Mercedes-Benz
Type/model: HTA-MB-TD
Article number: HTA-MB-TD
Manufacturer 4:
Snap-on Equipment srl
via per Carpi 33
4201 Correggio
Italy
https://eu.johnbean.com
https://eu.hofmann-equipment.com
Type/model: John Bean - V3400 MB-1
Article no.: EEWA553MB1
Type/model: Hofmann - geoliner 790 MB-1
Article no.: EEWA753MB1
Type/model: Hofmann - Geoliner 680 MB Gen II
Article no.: EEWAEU713AM7
Type/model: John Bean - Visualiner 3D2 MB Gen II
