Platí pro: Model 460, 461, 463 with front axle 730.3 Model 611 with rear axle 741.52 Model 667 with rear axle 741.530/540/55 Model 668 with rear axle 741.55 Model 670.199 with front axle 730.350 Model 670.411/412/464/465 with front axle 730.351 Model 903.0/4, 904.0/4 with code ZG1 (Engageable all-wheel drive) Model 903.0/4, 904.0/4 with code ZG2 (Permanent all-wheel drive) Model 903.0/4, 904.0/4 with code ZG3 (Engageable all-wheel drive with gear reduction) Model 909
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Platí také pro motory/převodovky: 730 3**, 730 350, 730 351, 741 52*, 741 530, 741 540, 741 55*
WS33.00-N-3077C
343 589 03 15 00 Drift punch
17.01.2017
Model
460, 461, 463 with front axle 730.3
Model
611 with rear axle 741.52
Model
667 with rear axle 741.530/540/55
Model
668 with rear axle 741.55
Model
670.199 with front axle 730.350
Model
670.411/412/464/465 with front axle 730.351
Model
903.0/4, 904.0/4
with code ZG1 (Engageable all-wheel drive)
Model
903.0/4, 904.0/4
with code ZG2 (Permanent all-wheel drive)
Model
903.0/4, 904.0/4
with code ZG3 (Engageable all-wheel drive with gear reduction)
Model
909
Verwendung in FG 33/35/Satz C
Purpose: Front axle 730.350/351: Drift for removing the bushings of the drive shaft. Front axle 730.30/31/32/39, Model 903, 904: Drift for driving the outer tapered roller bearing onto the wheel hub. Front axle 730, 732, Model 909: Drift for driving the outer tapered roller bearing and the radial shaft sealing ring onto the wheel hub. Rear axle 741, Model 909: Drift for removing the outer tapered roller bearing at the rear axle.
