P64.20-4699-08
Make angle bracket (2) for left side piece at top.
Material: steel
L-profile (40 mm 20 mm 3 mm)
Dimensions:
1A 25 mm
1B 8 mm
1C 50 mm
1D 166 mm
1E 40 mm
1F 20 mm
1G 200 mm
P64.20-4700-08
Make angle bracket (3) for left rear part at top.
Material: steel
L-profile (40 mm 20 mm 3 mm)
Dimensions:
1H 22 mm
1J 8 mm
1K 30 mm
1L 170 mm
1M 40 mm
1N 20 mm
1P 200 mm
P64.20-4703-08
Make angle bracket (2) for right side piece at top.
Material: steel
L-profile (40 mm 20 mm 3 mm)
Dimensions:
2A 25 mm
2B 8 mm
2C 50 mm
2D 166 mm
2E 40 mm
2F 20 mm
2G 200 mm
P64.20-4704-08
Make angle bracket (3) for right rear part at top.
Material: steel
L-profile (40 mm 20 mm 3 mm)
Dimensions:
2H 22 mm
2J 8 mm
2K 30 mm
2L 170 mm
2M 40 mm
2N 20 mm
P2 200 mm
P64.20-4726-11
Make connecting struts (1) for connection of angle brackets (2) on upper side piece and angle brackets (3) on the upper rear piece for the left and right sides of the vehicle.
Material: steel
L-profile (40 mm 20 mm 3 mm)
Shown here is the left-hand side of the vehicle
The angle brackets (2, 3) are installed on the left and right sides of the vehicle. The connecting strut (1) is to be adapted and welded to the angle brackets as shown in the picture opposite (2, 3).
Following removal, the finished assembly struts are to be marked relative to their application location.