EinPAS 15 Motor › 15.20 Soustava mazání motoru › 15.20.31 Filtr/chlazení/termostat/ventilátor/nádržka — Řada 117 · Řada 156 · Řada 176 · Řada 246
Platí také pro motory/převodovky: 607 ***
WF58.50-P-2041-01A
Container for escaping engine oil during oil filter change
MODEL
117, 156, 176, 246 with ENGINE 607
Container from empty Mercedes-Benz 1-liter oil can
P18.00-2394-05
1
Remove adhesive label from front and rear side of empty Mercedes-Benz 1-liter oil can.
2
Cut empty Mercedes-Benz 1-liter oil can at the 500 ml mark as shown.
3
Approximately 15 mm below the cut edge of the Mercedes-Benz 1-liter oil can, use a suitable tool (e.g. Phillips screwdriver) to create two holes in the corner areas as shown.
The holes should be just large enough so that a cable tie with dimensions measuring 4.7 x 390 mm can be pulled through.
4
Pull cable tie measuring 4.7 x 390 mm through the two holes of the lower section of the Mercedes-Benz 1-liter oil can as shown and close.
You may need to pull the cable tie tighter together for the first application of the container from the empty Mercedes-Benz 1-liter oil can.
Parts ordering note
Part no.
Designation
Quantity
111-05472
HellermannTyton GmbH, cable tie, T-series in PA66HSW black, -40 °C up to +125 °C, www.hellermanntyton.de
