Fuel return line of unit pumps for compression test

W07.00-1004-09

1 Injection pipe

2 Hose part (8 units, approx. 18 cm length)

3 Hose part (6 units, approx. 6 cm length)

4 T Part

5 Cable

Manufacture the fuel return pipe according to the picture and instructions above. For parts, check the list below.

The fuel return pipe manucfatured by yourself can also be used in 4 and 6 cylinder engines, fixing the respective hose part (2) with a clamp.

1 Separate the injection pipes (1) approx. 3 cm from elbow and burr the separation points.

2 Manufacture eight hose parts (2) with around 18 cm length and six hose parts (3) with around 6 cm length.

3 Fit all the hose parts (2, 3) in parts T (4) and introduce the injection pipes cut (1) approx. 1.5 cm on the tip apart from the hose parts (3).

4 Introduce the two injection pipes left (1) in the hose parts left (2) of your own manufacturing around 1.5 cm.

5 Introduce the part T (4) on the pipe (5) (hose left) and fit the two free tips on the pipe manufactured by yourself on the part T (4).

Part number / Quantity

A 541 070 15 33 / (4 parts)

A 319 869 00 58 / (7 parts)

A 359 869 00 94 / (7.0 m)

Description

Injection pipe

T Part

Hose