Program Audio/COMAND control panel control unit (code: 1609P82C64)

SM82.85-P-0039A

Program Audio/COMAND control panel control unit (code: 1609P82C64)

06.12.2016

Model

205, 213, 253

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

P

02-4762

Connect/disconnect diagnostic system (XENTRY/DAS)

P

02-5058

Connect/disconnect battery charger (with XENTRY/DAS connected)

P

02-9675

Calibrate Audio/COMAND control panel control unit (with XENTRY/DAS connected)



Check

1

Check whether vehicle is affected by measure

Model 205 as of 359592 up to 394914

SM82.85-P-0039-01AAA

Model 213 as of 015755 up to 041921

SM82.85-P-0039-01AAB

Model 253 as of 082940 up to 110013

SM82.85-P-0039-01AAC

Programming

2

Connect diagnostic unit

Use XENTRY Diagnostics version 09/2016 or higher. The operation steps must be performed exactly as per Xentry Diagnostics! Make sure that the vehicle's on-board electrical system battery has sufficient voltage supply (more than 12.5 V) by using a battery charger. If Xentry Diagnostics is already connected to the vehicle, continue with operation step 3.



AD00.00-P-2000-04B

3

Program Audio/COMAND control panel (A40/9)

 To do so, select the menu item "Control units view – Information and communication – COU Audio/COMAND control panel – A40/9 Audio/COMAND control panel – Special procedures – Calibration of control unit A40/9".

 Then follow the user guidance in Xentry Diagnostics.

 If two or more instances of control unit programming or SCN coding are carried out during a workshop visit, the operation items 02­4762 and 02­5058 must only be charged once for each workshop order.

4

Disconnect diagnostic equipment



AD00.00-P-2000-04B