Update software for COMAND control unit (code: 1411P82C26)

SM82.85-P-0019A

Update software for COMAND control unit (code: 1411P82C26)

10.6.15

Model

205

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

P

024762

Connect/disconnect diagnostic system (XENTRY/DAS)

P

025058

Connect/disconnect battery charger (with XENTRY/DAS connected)

P

028772

Update software for COMAND control unit (with XENTRY/DAS connected)



Check

1

Check whether vehicle is affected by measure

MODEL 205 from WDD2052041F013365 to WDD2052401F050889

SM82.85-P-0019-01AAA

 

Remove/install

2

Connect XENTRY DAS



AD00.00-P-2000-04B

 Use XENTRY DAS version 09/2014 with corresponding Regio-DVD or a more recent version.
The operation steps must be performed exactly as per XENTRY DAS!
Make sure that the vehicle's on-board electrical system battery has sufficient voltage supply (more than 12.5V) by using a battery charger.

 If Xentry DAS is already connected to the vehicle, start with operation step 3.

3

Update software for COMAND controller unit



AD00.00-P-2000-04B

 To do so, select "Control units view – Information and communication – COMAND – Adaptations – Control unit programming“ menu item.

 Then follow the user guidance in XENTRY DAS.

4

Disconnect XENTRY DAS

Parts ordering note

Part no.

Designation

Quantity

HLI 000 000 20 23

Update Regio-DVD 09/2014

n. B.

A 205 584 33 02

Digital Owner's Manual DVD as of 09/2014 valid for Europe

n. B.