Program Touchpad control unit (code: 1403P82A89)

SM82.85-P-0018A

Program Touchpad control unit (code: 1403P82A89)

27.10.2014

MODEL

205, 217, 222

with CODE 531 (COMAND APS)

MODEL

205

with CODE 522 (Audio 20 radio)

Modification notes

21.10.2014

Test step 1 expanded.

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

P

024762

Connect/disconnect diagnostic system (XENTRY/DAS)

P

025058

Connect/disconnect battery charger (with XENTRY/DAS connected)

P

028509

Update software for touchpad control unit (XENTRY/DAS connected)



Check

1

Check whether vehicle is affected by measure

MODEL 205 from WDD2050022F015529 to WDD2050452F019378

SM82.85-P-0018-01AAA

MODEL 217 from WDD2173781A000133 to WDD2173851A000179

SM82.85-P-0018-01AAB

Model 222 from WDD2220321A056560 to WDD2221851A056080

SM82.85-P-0018-01AAC

Programming

2

Connect diagnostic system

Use XENTRY DAS Version 03/2014 with add-on 3560 or higher. The operation steps must be performed exactly as per XENTRY DAS! Make sure that the vehicle's on-board electrical system battery has sufficient voltage supply (more than 12.5 V) by using a battery charger. If XENTRY DAS is already connected to the vehicle, continue with operation step 3.



AD00.00-P-2000-04B

3

Program touchpad control unit (A105)

 To do this, select menu item Control units view  Information and communication  TPAD  Touchpad  Adaptations  Control unit programming.

4

Disconnect diagnostic system



AD00.00-P-2000-04B