Perform SCN coding of COMAND/Audio 20 control unit (code: 1405P54B07)

SM82.85-P-0017A

Perform SCN coding of COMAND/Audio 20 control unit (code: 1405P54B07)

14.8.14

MODEL

205

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

P

024762

Connect/disconnect diagnostic system (XENTRY/DAS)

P

025258

Connect/disconnect battery charger (with XENTRY/DAS connected)

P

028566

Perform SCN coding on COMAND/Audio 20 control unit



Check

1

Check whether vehicle is affected by measure

MODEL 205 from WDD2050041F000823 to WDD2050421F009030

SM82.85-P-0017-01AAA



Install

2

Connect diagnostic system

Use Xentry DAS version 05/2014 or higher. The operation steps must be performed exactly as per XENTRY DAS! Make sure that the vehicle's on-board electrical system battery has sufficient voltage supply (more than 12.5 V) by using a battery charger. If XENTRY DAS is already connected to the vehicle, continue with operation step 3.



AD00.00-P-2000-04B

 This measure requires that all the latest available add-ons are installed!

3

Perform SCN coding in COMAND or Audio 20 control unit

 To do so, select "Control units view  Information and communication  COMAND  Adaptations  Configuration- SCN coding".
Then follow the user guidance in XENTRY DAS.

4

Disconnect diagnostic system



AD00.00-P-2000-04B