sm6420p101201a

Remove corroded rear floor assembly between the longitudinal member and the rear fender

Typ sm · téma 64.20 · verze 0100 · 2007-11-15

Platí pro: MODEL 210

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 64 Zadní stěna a záď › 64.20 Záď — Řada 210

EinPAS 35 Karoserie/rám/montované díly › 35.31 Zadní stěna/záď vozidla › 35.31.30 Zadní stěna/záď vozidla — Řada 210

EinPAS 45 Data/informace › 45.20 Informace/opatření › 45.20.40 Servisní opatření — Řada 210

SM64.20-P-1012-01A

Remove corroded rear floor assembly between the longitudinal member and the rear fender

Remove corroded rear floor assembly between the longitudinal member and the rear fender

P64.20-5119-06

Shown on model 210.2

1 Expose spot welds on rear floor assembly (1) and drill to diameter of 6.5 mm (area A).

2 Expose spot welds on rear floor assembly (1) and cut out (areas B and C).

Remove corroded rear floor assembly between the longitudinal member and the rear fender

P64.20-5120-11

Shown on model 210.2

3 Expose spot welds on rear floor assembly (1) and cut out (areas D and E).

4 Remove corroded rear floor assembly (1).

5 Remove any corrosion in the repair area using a shank brush.