Program Electronic Stability Program (ESP(R)) control unit (code: 1601P43A03)

SM42.45-P-0019A

Program Electronic Stability Program (ESP(R)) control unit (code: 1601P43A03)

09.07.2018

Model

205

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

P

02-4762

Connect/disconnect diagnostic system (Xentry/DAS)

P

02-5058

Connect/disconnect battery charger (with Xentry/DAS connected)

P

02-9334

Update control unit ......................... software (with XENTRY/DAS connected), Acc. no.: .........., code: ..........



Check

1

Check whether vehicle is affected by measure

Model 205 as of 089868 up to 308640

SM42.45-P-0019-01AAA

Programming

2

Connect diagnostic unit

Use XENTRY Diagnostics version 12/2015 with all available add-ons or a newer version. The operation steps must be performed exactly as per Xentry Diagnostics! Make sure that the vehicle's on-board electrical system battery has sufficient voltage supply (more than 12.5 V) by using a battery charger. If Xentry Diagnostics is already connected to the vehicle, continue with operation step 3.



AD00.00-P-2000-04B

3

Program Electronic Stability Program control unit (N30/4)

 To do so, select menu item Control units view  Suspension  ESP® Electronic Stability Program  Adaptations  Control units update  Update of control unit software.

 Then follow the user guidance in Xentry Diagnostics.

 If two or more instances of control unit programming or SCN coding are carried out during a workshop visit, the operation items 02­4762 and 02­5058 must only be charged once for each workshop order.

5

Disconnect diagnostic equipment



AD00.00-P-2000-04B