Parts ordering notes
Part no. | Designation | Quantity |
A 670 553 00 16 | Kit 1 - Retrofitting 2-switches, 12 V and 24 V, left-hand steering | 1 |
Parts identified with an X below are included in this parts kit | 1 | |
A 669 540 87 36 | X Waist rail wiring harness (left-hand steering) or | |
A 669 540 88 36 | Waist rail wiring harness (right-hand steering) | |
A 669 540 14 27 | X Frame wiring harness (all wheelbases, loop if necessary) | 1 |
A 005 545 10 14 | X Switch (10.5 bar) B75 | 1 |
A 005 545 11 14 | X Switch (12 bar) B74 | 1 |
A 004 545 04 05 | X Relay (12 V) or | 2 |
A 003 545 96 05 | X Relay (24 V) | 2 |
N 072 581 000 304 | X 10 A fuse | 1 |
A 006 545 44 26 | X Sockets | 2 |
A 000 990 44 68 | X Reducer | 1 |
A 000 429 02 27 | X Thrust ring | 3 |
A 000 987 04 46 | X O-ring | 3 |
N 007 603 012 111 | X Copper sealing ring | 3 |
1 Unplug socket of brown/blue cable from relay k18, chamber 2
Compressor spring actuator relay is seated on the auxiliary relay mount behind the electrical center
2 Unplug socket of brown/blue cable from white connector XF.B5, chamber 2
Footwell on co-driver's side
3 Remove complete brown/blue cable
4 Unplug socket of blue cable from relay K18, chamber 4 and pinch off socket
5 Unplug connector X35
X35, white 1-pin connector, 4 mm2 black cable branches off to the branch-off lines on the electrical center
6 Unplug contact spring F39.1 from fuse holder of fuse F39
F39.1, 4 mm2 black cable
F39, compressor spring actuator
7 Remove complete 4 mm2 cable