Parts ordering notes
Part no. | Designation | Quantity |
A 670 553 00 16 | Kit 1 - retrofitting 2-switches, 12 V and 24 V, left-hand steering | 1 |
Parts identified with an X below are included in this parts kit | 1 | |
A 669 540 87 36 | X Waist rail wiring harness (left-hand steering) or | |
A 669 540 88 36 | Waist rail wiring harness (right-hand steering) | |
A 669 540 14 27 | X Frame wiring harness (all wheelbases, loop if necessary) | 1 |
A 005 545 10 14 | X Switch (10.5 bar) B75 | 1 |
A 005 545 11 14 | X Switch (12 bar) B74 | 1 |
A 004 545 04 05 | X Relay (12 V) or | 2 |
A 003 545 96 05 | X Relay (24 V) | 2 |
N 072 581 000 304 | X 10 A fuse | 1 |
A 006 545 44 26 | X Sockets | 2 |
A 000 990 44 68 | X Reducer | 1 |
A 000 429 02 27 | X Thrust ring | 3 |
A 000 987 04 46 | X O-ring | 3 |
N 007 603 012 111 | X Copper sealing ring | 3 |
N42.20-2030-01
1 Pull out 3 relays on the left of the electrical center
2 Remove glove compartment lid and glove compartment
3 Fold electrical center forwards
4 Pull bracket for auxiliary relay forwards
N42.20-2029-01
Only part of the wiring harness is used as a part is already fitted in the current vehicle. (Figure)
5 Unplug socket of the brown/yellow cable from the white connector XF.B5, chamber 6
6 Unplug socket of brown/blue cable from the white plug XF.B5, chamber 2
7 Unplug socket of brown/blue cable from relay holder K18 (compressor spring actuator) chamber 2
8 Unplug socket of 2 blue cables from relay holder K18
9 Unplug contact spring of black/yellow cable from the white plug XF.B5, chamber 7
10 Separate 1 brown cable, 1 blue cable and 1 black/red cable from wiring harness
11 Separate connector X35 with the 1.5 mm2 black cable to fuse F49 and black 4 mm2 cable to fuse F39 from the remaining wiring harness
X35, white 1-pin connector
F49, compressed-air drier heater
F39, compressor