Parts ordering notes
Part no. | Designation | Quantity |
A 670 553 04 16 | Kit 5 - Conversion to heated compressed-air drier, code B65 12 V | 1 |
A 670 553 05 16 | Kit 6 - Conversion to heated compressed-air drier, code B65 24 V | 1 |
Parts identified with X1 below are included in parts kit 5 Parts identified with X2 below are included in parts kit 6 | ||
A 001 431 98 15 | X1 Heated compressed-air drier (12 V) or | 1 |
A 001 431 97 15 | X2 Heated compressed-air drier (24V) | 1 |
A 668 420 02 71 | X1/2 Safety valve assy. or | 1 |
A 668 420 02 71 | safety valve assy. (only with 4800 wheelbase and transmission G60 or automatic) | 1 |
N 007 603 012 405 | X1/2 Sealing rings | 4 |
A 669 540 54 36 | X1/2 Frame wiring harness (for all wheelbases) | 1 |
A 668 427 20 41 | X1/2 Bracket for safety valve | 1 |
N 000 000 000 932 | X1/2 Clamp for safety valve | 1 |
N 914 146 006 102 | X1/2 M6x16 hexagon bolt | 1 |
N 913 023 006 001 | X1/2 M6-8 nut | 1 |
N 000 908 022 011 | X1/2 M22x1.5 plug | 1 |
N 007 603 022 403 | X1/2 Sealing ring (for opening of old safety valve) | 1 |
A 006 997 30 90 | X1/2 Cable strap | 10 |
A 001 997 84 90 | X1/2 Cable connector | 20 |
N42.20-2019-01
1 Unscrew unheated compressed-air drier
Remove two connections (inlet/outlet), then unscrew unheated compressed-air drier on left of the compressor
2 Screw on new compressed-air drier
Screw onto the side with existing M8x50 bolts
With the 4800 wheelbase and transmission G60 or automatic transmission, re-use existing bracket A 668 427 19 41 (fitted higher up due to distance to propellor shaft)
Compressed-air drier (A 001 431 98 15 or A 001 431 97 15)
N42.20-2025-01
3 Unscrew plastic or metal pipe between the compressor outlet and distributor
4 Install safety valve
Safety valve assy. (A 668 420 02 71)
Safety valve assy. (A 668 420 03 71) with RD 4800 + G60/automatic
5.1 Screw on bracket (2)
N42.20-2024-01
6 Screw on bracket (2) for safety valve, clamp (3), M6x16 hexagon bolt and M6-8 nut
Safety valve bracket (A 668 427 20 41)
Clamp (N 000 000 000 932)
M6x16 hexagon bolt
(N 916 146 006 102)
M6-8 nut (N 913 023 006 001)
N42.20-2020-01
7 Unscrew previously fitted safety valve on distributor, seal opening with plug (B) and sealing ring
Plug (A 000 908 022 001)
Sealing ring (N 007 603 022 403)
8 Connect bent end of compressed-air line
Connect the compressed-air line, which runs back to the frame, to connection 21 (outlet) of the drier again