sm4210w0004a

Check brake hoses at front axle

Typ sm · téma 42.10 · verze 0100 · 2018-07-17

Platí pro: Model 967 Code: BRAKE-FA

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 42 Brzdy - hydraulická část a mechanická část › 42.10 Provozní brzda — Řada 967

EinPAS 21 Brzdy/podtlakový systém/vzduchotlaké zařízení › 21.15 Provozní brzda/podtlakový systém › 21.15.13 Potrubí/hadice/ventil — Řada 967

EinPAS 45 Data/informace › 45.20 Informace/opatření › 45.20.40 Servisní opatření — Řada 967

SM42.10-W-0004A

Check brake hoses at front axle

21.06.2018

Model

967

Code: BRAKE-FA

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

N

022595

Check 2 electric lines of rpm sensors and 2 brake hoses of front axle

0,3 h

42 910 75

BREMS-VA

N

022596

Replace brake hose of front axle (after check)

0,4 h

42 910 75

BREMS-VA

N

022597

Replace 2 brake hoses of front axle (after check)

0,7 h

42 910 75

BREMS-VA

N

022598

Replace rpm sensor of front axle (after check)

0,3 h

42 910 75

BREMS-VA

N

022599

Replace 2 rpm sensors of front axle (after check)

0,6 h

42 910 75

BREMS-VA

Warning

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut.

AS60.80-Z-0001-01A

Topical note

Notes on tilting the cab

AH60.80-N-0003-01A

Notes on compressed air connection systems

AH00.18-N-0001-01A

Check

1

Switch off ignition.

2

Apply parking brake.

3

Tilt cab.

4

Check brake hose on front axle at left and right for damage.

If the brake hose is damaged:

Install new brake hose with adequate distance from tire (even with steering turned).

With regard to return shipment or scrapping of removed parts, please observe the information in your warranty system.

5

Check electrical line of rpm sensor on front axle at left and right for damage.

If the electric line of the rpm sensor is damaged:

Install new rpm sensor and route electric line with adequate distance from tire (even when steering is turned) at brake hose.


AR42.30-W-0140H

With regard to return shipment or scrapping of removed parts, please observe the information in your warranty system.

6

Tilt back cab.

Check for leaks

7

Fully depress and lock brake pedal in place with brake pedal jack.

Only if a brake hose was replaced.

Brake pedal jack

*000589183100

8

Check compressed-air connector coupling at new brake hose for leaktightness.

Only if a brake hose was replaced.

Use commercially available leak detector spray.

9

Remove brake pedal jack.

Only if a brake hose was replaced.

Check brake hoses at front axle

000 589 18 31 00

Brake pedal jack

Parts ordering note

Part no.

Designation

Quantity

A 967 420 00 48

Brake hose

n. B.

A 007 542 72 18

Rpm sensor

n. B.

A 941 546 02 43

Cable bracket

n. B.

A 002 997 24 90

Cable tie

n. B.

Odkazované dokumenty