Check screws/bolts from stabilizer link to vehicle frame bearing bracket

SM32.35-W-0002A

Check screws/bolts from stabilizer link to vehicle frame bearing bracket

3.6.14

MODEL

956 with FRONT AXLE 739.5

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

N

028688

Check screws/bolts from stabilizer link to vehicle frame bearing bracket

0,2 h

32 920 90

STABIL-NGE

N

028689

Replace bolt for stabilizer link to bearing bracket on vehicle frame (after check)

0,2 h

32 920 90

STABIL-NGE

N

028690

Replace each further bolt for the stabilizer link to the bearing bracket on the vehicle frame (after check)

0,1 h

32 920 90

STABIL-NGE

1

Stabilizer link

3

Bearing cap

5

Vehicle frame

2

Screw

4

Bearing bracket

Check

1

Check tightening torque of bolts (2) for fastening of stabilizer link (1) on left and right bearing bracket

 All bolts (2) must be tightened with min. 250 Nm.

If a tightening torque of 250 Nm is reached on all bolts (2) before the bolt (2) can be turned any further:



Perform no further operations and end measure.

If a tightening torque of 250 Nm is not reached before the bolt (2) can be turned further:



Fit respective new bolt (2).

 With regard to return shipment or scrapping of removed parts, please observe the information in your warranty system.

 Bearing cap of stabilizer link to vehicle frame bearing bracket

*BA32.35-N-1001-02H

 Front axle stabilizer bar

Number

Designation

Model 956 with front axle 739.5

BA32.35-N-1001-02H

Bearing cap of stabilizer link to vehicle frame bearing bracket

Stage 1

Nm

225

Stage 2

 °

90

Parts ordering note

Part no.

Designation

Quantity

N910105 016006

Bolt, M16x1.5x80

n. B.