sm3225p0018a

Correct torque of shock absorber threaded connection on front axle and rear axle (code: 1509P32B88)

Typ sm · téma 32.25 · verze 0200 · 2016-09-07

Platí pro: Model 205, 253

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 32 Odpružení › 32.25 Tlumič pérování, tlumiče, pružicí jednotky — Řada 205 · Řada 253

EinPAS 20 Podvozek › 20.16 Odpružení › 20.16.30 Pružina/měch vzduchového odpružení/tlumič/pružinová vzpěra — Řada 205 · Řada 253

EinPAS 45 Data/informace › 45.20 Informace/opatření › 45.20.40 Servisní opatření — Řada 205 · Řada 253

SM32.25-P-0018A

Correct torque of shock absorber threaded connection on front axle and rear axle (code: 1509P32B88)

06.09.2016

Model

205, 253

Modification notes

06.09.2016	Selbstsichernde Mutter Stoßdämpfer an Federlenker	Typ 205	BA32.25-P-1001-03P
06.09.2016	Selbstsichernde Mutter Stoßdämpfer an Federlenker	Typ 253	BA32.25-P-1001-03P

Operation no. of the operation texts or standard texts and flat rates
Category	Op. no.	Operation text	Time	Acc. no.	Code
P	02-9349	Correct shock absorber threaded connection on front and rear spring control arm

Correct torque of shock absorber threaded connection on front axle and rear axle
(code: 1509P32B88)

Shown on model 205

1	Nut
2	Nut

P32.25-2386-04

	Check
1	Check whether vehicle is affected by measure	Model 205 as of 256943 up to 266456	SM32.25-P-0018-01AAA
		Model 253 as of 005348 up to 008747	SM32.25-P-0018-01AAB
	Correct torque of threaded connection
2	Drive vehicle onto ramp platform
3	Release suspension strut nut (1) at front left and front right spring control arm and tighten with specified torque	 Threaded connections must be made when the vehicle is in ready-to-drive condition.
		 Nut, suspension strut to spring control arm	*BA32.25-P-1002-04P
4	Remove left and right spring control arm cover from the rear axle
5	Release rear axle damper nut (2) at left and right spring control arm and tighten with specified torque	 Threaded connections must be made when the vehicle is in ready-to-drive condition.
		 Self-locking nut, shock absorber to spring control arm	*BA32.25-P-1001-03P
6	Install left and right spring control arm cover at the rear axle

 Rear axle shock absorber

Number	Designation				Model 205	Model 253
BA32.25-P-1001-03P	Self-locking nut, shock absorber to spring control arm	Air suspension	Stage 1	Nm	100	100
			Stage 2	°	90	90
		Steel suspension	Stage 1	Nm	45	45
			Stage 2	°	90	90

 Suspension struts

Number	Designation			Model 205	Model 253
BA32.25-P-1002-04P	Nut, suspension strut to spring control arm	Stage 1	Nm	95	95
		Stage 2	°	45	45

Odkazované dokumenty