W13.30-1198-09
1 Cap
3 Marking
2 Crankshaft
Operation no. of operation texts or standard texts and flat rates
Category | Op. no. | Operation text | Time | Acc. no. | Code |
O | 027814 | OPERATION: CHECK CRANKSHAFT OF COMPRESSOR | 0,4h | 13 901 55 | KW-LUP |
O | 027815 | OPERATION: REPLACE CRANKSHAFT OF COMPRESSOR (AFTER CHECK) | 5,4h | 13 901 55 | KW-LUP |
| Remove | ||
Danger! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut. | |
| Notes on tilting the cab | ||
1 | Tilt cab | ||
2 | Remove cap (1) at side on timing case | ||
| Checking | ||
3 | Check identification (3) on crankshaft (2) of compressor | If the identification is "A5410516" the correct crankshaft (2) is installed: | |
Proceed with step 5. | |||
If the identification is "44205" an incorrect crankshaft (2) is installed. This has to be replaced: | |||
Proceed with step 4. | |||
Replace | |||
4 | Replace crankshaft (2) of compressor | With regard to return shipment or scrapping of removed parts, please observe the information in your warranty system. | |
| Install | ||
5 | Attach end cover (1) | | |
6 | Lower cab |
Timing case
Number | Designation | Engine | ||
BA01.60-N-1003-01B | Bolt, side compressor hole cover to timing case | Nm | 50 | |
Parts ordering notes
Part no. | Designation | Quantity |
QAP 602 14 05 | Parts kit | 1 |
Odkazované dokumenty
- ah6080n000301a Pokyny ke sklápění kabiny řidiče
- ar1330w7042g Demontáž, montáž klikového hřídele a ojnice kompresoru
- as6080z000101a Nebezpečí úrazu v důsledku přivření a přiskřípnutí při sklápění kabiny řidiče