SI60.00-P-0006A | Service Information: brazing materials for MIG brazing | 9.3.07 |
MODEL 163, 168, 169, 203, 204, 208.3, 209.3, 210, 211, 216, 219, 220, 221, 240
In the case of the MIG solder connections to structural components as described in the WIS, for strength reasons it is imperative to use the soldering material SG-CuAL8 (recommended wire diameter: 1.0 mm).
According to the Workshop Equipment Manual, the material SG-CuAL8 is supplied in 5 kg packs.
The soldering material SG-CuSi3 must be used in the case of joining methods on outer paneling parts which are then to be reworked using body solder.
The soldering material SG-CuAL8 cannot be used here as it would not bind properly with the body solder on account of the aluminum component in the soldering material.
Odkazované dokumenty
- ah6000p002401n Všeobecné pokyny k opravám vozidel s karoserií z vysokopevnostní oceli