si5421p0033a

Service information: In addition install wiring harness when replacing the front SAM control unit with fuse and relay module

Typ si · téma 54.21 · verze 0300 · 2009-10-16

Platí pro: MODEL 204 up to model year 2009 MODEL 212 with CODE (018) VEH. that are converted to a marketable condition with CODE (102) Control code for production test 2

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 54 Elektrické zařízení, výstroj a přístroje › 54.21 Řídicí jednotky / moduly — Řada 204 · Řada 212

EinPAS 25 Palubní síť/síť/multifunkční systém › 25.15 Síť/multifunkční systém › 25.15.12 Snímač/kabelový svazek — Řada 204 · Řada 212

EinPAS 45 Data/informace › 45.20 Informace/opatření › 45.20.20 Servisní informace — Řada 204 · Řada 212

SI54.21-P-0033A

Service information: In addition install wiring harness when replacing the front SAM control unit with fuse and relay module

13.10.09

MODEL 204 up to model year 2009

MODEL 212
with CODE (018) VEH. that are converted to a marketable condition
with CODE (102) Control code for production test 2

Modification notes

13.10.09

Pin in plug cage 2l updated

For model year 2010 a line connection for the starter relay is discontinued in the front SAM control unit with fuse and relay module (N10/1).

For vehicles which have been built before model year 2010, therefore, when replacing the SAM control unit a wiring harness (included in SAM delivery contents) should be installed at the same time, otherwise start enable will not be issued.

The installation takes place as per the repair description

AR54.21-P-1260CW From plug cage 6I (6), Pin 4

To plug cage 2I (2), Pin 12.

Service information: In addition install wiring harness when replacing the front SAM control unit with fuse and relay module

P54.21-3109-05

Plug cage affected

2 Plug cage 2I

6 Plug cage 6I

Remove/install and replace front SAM control unit with fuse and relay module

AR54.21-P-1260CW

Odkazované dokumenty