This service information has the objective of guiding the "retrofitting" subsequent installation of TP-5 module through the proposal of creating a part set with adjustment harness.
With this part set we intend to:
– Avoid bigger intervention on the cabin's main harness;
– Standardize cable identification colors according to names on the original harness;
– Provision of additional cable for capturing signal D8 from the tachograph;
– Avoid mistakes occasionally created during the manufacturing of field harness;
– Guaranteeing the crimping quality on end pieces;
– Reduce stopped vehicle time;
– Create part set A 001 446 10 60 00 10, with adjustment harness A 946 540 17 32 0010 ;
– Applied for vehicles Atego and Axor BlueTec 5 before 08/14.
–Before ordering the parts, check if the vehicle has the online support.
To perform this work, the following material will be necessary: |
Quantities | Description | Number |
1 | Part Set | A 001 446 10 60 0010 |
1 | Installation cable | A 958 543 10 30 |
1 | Online support | A 958 542 16 40 |
1 | 18-way MCP Connector | A 026 545 94 28 |
Verify CPC version.
The procedures for installation may be consulted in the documents below: