This service information is intended to guide the later installation process, "retrofitting", of the module TP5 through the proposal to create a set of pieces with adaptation harness.
With this part set we intend to:
Prevent major interventions on the main cab whip;
Standardize cable identification colors according to original harness nomenclature;
Provide additional cable for capturing the tachograph D8 signal;
Avoid mistakes occasionally created during the manufacturing of field whip;
Guaranteeing the crimping quality on end pieces;
Reduce stopped vehicle time;
Create part set A 001 446 10 60 00 10, with adjustment whip A 946 540 17 32 0010 ;
Applied to Atron BlueTec 5 vehicles.
To perform this work, the following material will be necessary: |
Qty | Description | Number |
01 | Part Set | A 001 446 10 60 0010 |
01 | 18-way MCP Connector | A 026 545 94 28 |
For the assembly it will be necessary to be oriented by the correlation table of the designation of connectors: |
Correlation of whip connectors A 946 540 1732 0010 | |||
ID Whip | Atron | Comments: | |
A | A119.3 | A119.3 | Module TP5 |
B | X64 | XT1 | Cab Connection |
C | X6.3/17 | XB.SCH.RE | LD Arrow |
D | X6.3/18 | XB.SCH.LI | LE Arrow |
E | KL31 | KL31 | KL31 |
F | KL30 | KL30L | KL30 |
G | KL15 | KL15 | KL15 |
H | X125.1 | X124.2 | Tachograph |
I | Z1 | Z1 | Star Point CAN. |
J | X232 | X232 | Panic Instl. |
1 | Posteriorly install the telematics platform module (TP5) | ||
| |||
| Electric circuit diagram of the telematics platform module (TP5) | Type 693 from 883980 up to 925358, 694 from 883980 up to 925358, 695 from 883980 up to 925358 with Code MS5 (Euro V), except Code MS3 (Engine version EURO 3) | |
| Electric circuit diagram of the telematics platform module (TP5) | Type 693 from 925359 up to 926358, 694 from 925359 up to 926358, 695 from 925359 up to 926358 with Code MS5 (Euro V), except Code MS3 (Engine version EURO 3) |