si4260g0017c
Service Information: Replacement of pressure limiting valve of compressed-air
system at annual maintenance service
Typ si · téma 42.60 · verze 0101 · 2020-04-02
Platí pro: Model 437.421/426/431/436 ## as of 241291 up to 262508
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Zařazení
Funkční skupina 2 Podvozek › 42 Brzdy - hydraulická část a mechanická část › 42.60 Vzduchotlaková část — Řada 437 (modely 421, 426, 431, 436)
EinPAS 21 Brzdy/podtlakový systém/vzduchotlaké zařízení › 21.35 Vzduchotlaké zařízení › 21.35.13 Potrubí/hadice/ventil — Řada 437 (modely 421, 426, 431, 436)
EinPAS 45 Data/informace › 45.20 Informace/opatření › 45.20.20 Servisní informace — Řada 437 (modely 421, 426, 431, 436)
SI42.60-G-0017C
| Service Information: Replacement of pressure limiting valve of compressed-air system at annual maintenance service
| 02.04.2020
|
Model
| 437.421/426/431/436 ## as of 241291 up to 262508
|
1
| Pressure limiting valve
|
2
| Thrust ring
|
3
| O-ring
|
Additional maintenance scope "Replacing pressure limiting valve (1)"
Please remember that replacing the pressure limiting valve (1) was included in the maintenance scope.
The pressure limiting valve (1) must be replaced annually with immediate effect.
This only affects models 437.421/426/431/436 as of vehicle identification end number 241291, in which the pressure limiting valve (1) is installed.
The maintenance schedule has been extended by this scope. Please notify your workshop staff about the change in the maintenance scope.
|
| Remove/install pressure limiting valve of compressed-air system
|
| AR42.60-G-0023C
|
Odkazované dokumenty
