si4010p0016a

Service information: Tire pressure on new vehicles

Typ si · téma 40.10 · verze 0100 · 2004-06-09

Platí pro: MODEL 163.113 /128 /157 /174 /175

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 40 Kola, měření geometrie podvozku › 40.10 Kola, pneumatiky — Řada 163 (modely 113, 128, 157, 174, 175)

EinPAS 20 Podvozek › 20.30 Kolo/pneumatika › 20.30.1 Základní informace — Řada 163 (modely 113, 128, 157, 174, 175)

EinPAS 45 Data/informace › 45.20 Informace/opatření › 45.20.20 Servisní informace — Řada 163 (modely 113, 128, 157, 174, 175)

SI40.10-P-0016A

Service information: Tire pressure on new vehicles

2.6.04

MODEL 163.113 /128 /157 /174 /175

Due to increasing complaints of tire vibration, it is important to note the following for new vehicles:

Tire pressure should NOT be dropped to customer/driving pressure until just prior to vehicle hand-over or before a test drive. Tire shipping pressure of 50 psi should be maintained at all times during vehicle storage.