si3530w0007a

Service information: Modified threaded ring on drive shaft of through-drive axle

Typ si · téma 35.30 · verze 0100 · 2010-11-05

Platí pro: REAR AXLE 740.893 /895 /897 /898, 748.263 /273 /275 Through-drive axle NAG7 with ring gear Ø 300 mm'

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 35 Zadní náprava › 35.30 Pohon, hnací hřídele

EinPAS 17 Hnací ústrojí/náprava › 17.51 Zadní náprava › 17.51.65 Převodovka zadní nápravy / průchozí náprava

EinPAS 45 Data/informace › 45.20 Informace/opatření › 45.20.20 Servisní informace

Platí také pro motory/převodovky: 740 893, 740 895, 740 897, 740 898, 748 263, 748 273, 748 275

SI35.30-W-0007A

Service information: Modified threaded ring on drive shaft of through-drive axle

2.11.10

REAR AXLE 740.893 /895 /897 /898, 748.263 /273 /275
Through-drive axle NAG7 with ring gear Ø 300 mm

As part of ongoing technical developments, since 15.03.2010 the through-drive axles named above have been manufactured using an improved retainer concept at the threaded ring on the drive shaft of the through-drive.

This technical modification and its effects on repair work are described in the document BT35.30-W-0009-01A, Threaded ring and through-drive cover modified.

Two newly developed
claw wrenches are required for removal and installation.

The repair instructions affected by the technical modification have been revised and are part of this service information bulletin.

They will also be published in the WIS with the WIS CD, version 11/10.

Threaded ring and through-drive cover modified

BT35.30-W-0009-01A

Remove/install drive flange at rear axle

AR35.30-W-0473MB

Remove/install radial sealing ring of drive shaft

AR35.30-W-4650MB

Remove/install threaded ring on through-drive drive shaft

AR35.30-W-0476B

Document change in vehicle data card

AR35.30-W-0476-04A

Adjust axial play of through-drive

AR35.30-W-0476-01B

Remove/install cover for through-drive

AR35.30-W-0350MB

Service information: Modified threaded ring on drive shaft of through-drive axle
Service information: Modified threaded ring on drive shaft of through-drive axle

748 589 03 07 00

Claw-type wrench

Claw-type wrench

748 589 02 07 00

Odkazované dokumenty