19 | Main shaft |
69 | Oil restrictor |
W26.50-1218-06
On all truck transmissions with a range group, an oil restrictor (69) must be installed in order to increase the oil feed to the sun gear. If the range group is removed during repair work, an oil restrictor (69) up to the transmission sequence number 379492 must then be retrofitted. All repair instructions which are affected by this technical modification have been revised. To install and remove the oil restrictor (69), new work instructions with the following special tools hollow-piston cylinder, hand pump, hydraulic hose and the extraction and insertion tool have been created.
It is essential to maintain a pressure of 175 bar (specified in the repair instructions) when pressing the oil restrictor (69) into and out of the main shaft (19).
The oil restrictor (69) can otherwise be damaged.
An AKUBIS direct information film "Retrofitting an oil restrictor" has been produced by Global Training for this technical modification. If you have any queries about receiving AKUBIS direct, please contact Global Training.
715 589 03 43 00
Extraction and insertion tool
652 589 00 33 23
Hydraulic hose (complete)
652 589 00 33 21
Hand pump
001 589 51 33 00
Hollow piston cylinder
Odkazované dokumenty
- ar2650w0004h Demontáž, montáž olejového ventilu u hlavního hřídele