SI25.20-W-0004A | Service Information: Notes on repairing the clutch booster | 20.5.09 |
MODEL 930, 932, 933, 934 with TRANSMISSION 715.5
except CODE (GE2) Electronic drive control II
except CODE (GE3) Mercedes PowerShift
except CODE (GE7) Mercedes PowerShift 2
For vehicles with Wabco clutch booster only
MODEL , 375, 940, 944 with TRANSMISSION 715.5 except CODE (GE3) Electronic drive control II
For vehicles with Wabco clutch booster only
MODEL , , 942, 943, 949, 950, 952, 953, 954, 957 with TRANSMISSION 715.5
For vehicles with Wabco clutch booster only
2 repair kits with enclosed repair instructions are available for the repair of the clutch booster.
We expressly point out, that for the following findings
- clutch booster does not function properly,
- clutch booster jams
- clutch booster sluggish,
- clutch booster seized or stuck,
- clutch booster not leaktight for oil or air,
the clutch booster may notbe replaced, but a repair must take place first with the appropriate repair kit.
The clutch booster may only be replaced if the repair kit is already fitted and there is still a complaint or on vehicles with code (GE1) Electronic drive control and fault code 2 41 90 if the clutch booster was clearly able to be diagnosed as the cause for the fault code.
Cost settlement
The operation number and work units for the repair of the clutch booster are to be taken from the valid documents.
Settlement for the repair must be made using damage code
29 015 and the respective damage type.
Parts ordering notes
Part no. | Designation | Quantity |
A 000 250 02 62 | Repair kit with repair instructions for vehicles without code (IY2) Hydraulic fluid as per sheet 345.0 | 1 |
A 000 250 07 62 | Repair kit with repair instructions for vehicles with code (IY2) Hydraulic fluid as per sheet 345.0 | 1 |