42 - 0860 Removal and installation of wheel speed sensors on rear axle model designation 611
|
Tightening torque Nm
Screw for fixing support plate of wheel speed sensor |
25 |
Removal, installation
1 Switch off ignition.
2 Detach electrical plug connection from wheel speed sensor on rear right-hand side member. Expose cable.
3 Detach drum hub and rotors. (35-0100)
4 Unscrew bolts on support plate for wheel speed sensor and remove wheel speed sensor from support plate.
Note
Each time a wheel speed sensor is dismantled, replace clamping bush and install using acid-free grease (Molykote 44 Light silicone grease).
Installation note
Push wheel speed sensor in as far as the stop in support plate. Clearance adjusts itself automatically once the vehicle is driven.
Route connection cable without chafing.
Perform function check.