2805 - Disassembly and assembly of wheel hub Front axle VL 0/5 (model 730.407) T2, Model 667

33 - 2805 Disassembly and assembly of wheel hub

1 Outer tapered roller bearing check, grease

3 Wheel hub (VL 0/5) check

4 Brake disc check

5 Rotor (ABS) check

6 Tapered roller bearing check, grease

7 Shaft seal replace

8 Bolt M 12x1.5 105...125 Nm replace

Test values

Wear limits for brake discs up to axle no. A 025 668 13 mm

as of axle no. A 025 669 19 mm

Capacity

Multiple-purpose grease per front wheel hub according to sheet no. 267* 50 g

* MB Specifications for Service Products

Special tools 

Removal

1 Pull tapered roller bearing outer race for outer bearing out of wheel hub with special tools  (01+02).

(01)  000 589 34 33 00

(02)  000 589 29 33 00

2 Pull inner tapered roller bearing and shaft seal out of wheel hub with special tools
 (01+02).

(01)  000 589 34 33 00

(02)  000 589 29 33 00

3 Pull tapered roller bearing outer race for inner wheel bearing out of wheel hub with special tools  (01 + 02).

(01)  000 589 34 33 00

(02)  000 589 31 33 00

4.1 On vehicles with ABS:

Attach special tool  (03).

(03)  730 589 00 34 02

4.2 Attach special tool  (04).

(04)  730 589 00 34 01

4.3 Screw special tool  (05) into special tool  (04).

(05)  001 589 36 33 00

4.4 Screw on special tool  (06) and tighten.

4.5 Pull off rotor.

(06)  001 589 36 33 00

5 Screw off brake disc.

Assembly

1 Screw on brake disc, 105...120 Nm.

Note

Chase threads in wheel hub before installing brake disc.

2.1 On vehicles with ABS:
Heat rotor up to 250 °C.

Note

Check temperature with thermal chalk or electronic thermometer.

2.2 Position rotor on special tool  (07).

(07)  730 589 00 33 00

2.3 Position wheel hub with brake disc installed and allow to cool.

Note
Cooling time approx. 3 min.

3 Drive tapered roller bearing outer race for outer wheel bearing in with special tool  (09).

(09)  731 589 00 15 00

4 Drive tapered roller bearing outer race for inner wheel bearing in with special tool  (08).

(08)  389 589 01 15 00

5 Pack inner wheel bearing well with grease and install.

6 Drive shaft seal in with special tool  (08).

(08)  310 589 00 15 00