27-110 Adjusting cable for control pressure
Operation number of the operation texts and work units or standard texts and flat rates: 27-1250 |
Adjusting
The engine throttle control must be correctly adjusted.
Vehicles with engines 103 and 603.96
1 Detach ball socket (19) and pull control pressure cable forwards until slight resistance can be felt. In this position, hold the ball socket over the ball head and attach; if necessary, adjust by means of the adjusting screw (15).
P27-0006-13<
Engine 103.98
P27-5314-13
Engine 603.96
P27-2147-13
Vehicles with engines 116 and 117
1 Remove air cleaner.
2 Slacken clamping screw (6) on connecting rod (8).
3 Extend connecting rod (8) and compress again until slight resistance can be felt. Then tighten clamping screw (6).
4 Refit air cleaner.
P27-5233-13
Vehicles with engine 104
1 Remove air cleaner.
2 Control pressure cable attached. Adjust control pressure cable (98) by turning adjusting screw (15) until the tips of the needles are in alignment.
P27-5310-15
Engine 104 with electronic accelerator pedal
P27-5311-15
Vehicles with engine 119
1 Remove air cleaner.
2 Turn adjusting screw (15) on bowden cable (98) until the pointer of the spacer sleeve (17) aligns with the adjusting screw.
P27-2420-13
Vehicles with engine 119.97
1 Remove air cleaner.
2 Slacken hexagon nuts (6) on connecting rod (8).
3 Turn connecting rod (8) until the tips of the needles are in alignment.
4 Tighten hexagon nuts (6).
P27-2418-13
Engine 120
Remove air cleaner. Turn adjusting screw (15) to adjust control pressure cable (98) until the tips of the needles are in alignment.