ra2663n230010x

0010 - Removal and installation of the auxiliary drive Auxiliary drive NA3/60 (-2b/c), transmission 714.0, 715.0 (G3/45, G3/50, G3/55, G3/60, G3/61) - Models 615, 616, 650

Typ ra · téma 26.45 · verze 9207 · 1992-02-13

Platí pro:

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 26 Mechanická převodovka › 26.45 Pomocný pohon, převodovka vývodového hřídele

Platí také pro motory/převodovky: 714 000, 714 001, 714 002, 714 006, 714 031, 714 033, 714 055, 714 056, 714 062, 714 063, 714 064, 714 066, 714 083, 714 084, 714 085, 714 089, 714 236, 714 240, 715 000, 715 021, 715 022, 715 024, 715 030, 715 031

26.63 - 010 Removal and installation of auxiliary drive

0010 - Removal and installation of the auxiliary drive Auxiliary drive NA3/60 (-2b/c), transmission 714.0, 715.0 (G3/45, G3/50, G3/55, G3/60, G3/61) - Models 615, 616, 650

1 Gasket

renew.

2 Spring washer

3 Hexagon bolt

25 Nm.

4 Sealing ring

renew.

5 Hexagon bolt

25 Nm.

6 Gasket

renew.

7 Cover

8 Spring washer

9 Hexagon bolt M7 x 16

20 Nm.

10 Auxiliary drive

Removal and installation

-------------------------------

0010 - Removal and installation of the auxiliary drive Auxiliary drive NA3/60 (-2b/c), transmission 714.0, 715.0 (G3/45, G3/50, G3/55, G3/60, G3/61) - Models 615, 616, 650

1 Unscrew pneumatic lines on shift cylinder.

2 Detach electrical connection at switch.

3 Remove drive shaft (11) (not on tipper vehicles).

0010 - Removal and installation of the auxiliary drive Auxiliary drive NA3/60 (-2b/c), transmission 714.0, 715.0 (G3/45, G3/50, G3/55, G3/60, G3/61) - Models 615, 616, 650

4 Remove cover (7) and unscrew hexagon bolt (3).

Installation note

Renew gasket (6).

0010 - Removal and installation of the auxiliary drive Auxiliary drive NA3/60 (-2b/c), transmission 714.0, 715.0 (G3/45, G3/50, G3/55, G3/60, G3/61) - Models 615, 616, 650

5 Unscrew hexagon bolt (3/5) with spring washers (2) and sealing ring (4).

Installation note

Renew sealing ring (4), tighten hexagon bolts,

25 Nm.

6 Remove auxiliary drive (10) and gasket.

Installation note

Renew gasket for auxiliary drive.

7 Install in reverse sequence.

Odkazované dokumenty