ra03333648312x

8312 - Replacement of the starter ring gear Engines OM 364, 366, 366 A/LA, EURO I

Typ ra · téma 03.30 · verze 9503 · 1995-01-15

Platí pro:

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 03 Pohonná jednotka › 03.30 Setrvačník, unašeč, tlumič kmitů, ozubený věnec startéru — Řada 364 (modely 918)

Platí také pro motory/převodovky: 356 901, 356 902, 356 903, 356 904, 356 905, 356 906, 356 907, 356 908, 356 909, 356 910, 356 911, 356 941, 356 943, 356 944, 356 945, 356 946, 356 947, 356 948, 356 949, 356 951, 356 952, 356 953, 356 979, 356 983, 356 986, 356 987, 356 989, 356 990, 356 991, 356 992, 356 993, 356 994, 356 995, 356 996, 356 999, 366 941, 366 942, 366 943, 366 999

03-8312 Replacing starter ring gear

Preceding work:

Flywheel removed (03-8001)

Data

I

II

III

Engine model designation

356.901/902/903

904/905/906

907/908/909

910/911/941

944/945/947

948/951/952

953

364.918

356.943/946/949

986/987/989

990/991/992

993/994/995

996

356.983

366.999

Diameter for mounting
starter ring gear

335.530

335.390

360.575

360.435

392.575

392.435

Starter ring gear inner diameter

334.830

334.690

359.830

359.690

392.140

392.000

Overlap of
starter ring gear

0.840

0.560

0.885

0.605

0.575

0.295

Permissible lateral runout
of mounted
starter ring gear

0.5

0.5

0.5

Starter ring gear mounted when heated to

250 to 280°C

250 to 280°C

250 to 280°C

8312 - Replacement of the starter ring gear Engines OM 364, 366, 366 A/LA, EURO I

Replacing

1 Rapidly heat starter ring gear to 250° to 280°C with a welding torch and press off.

Risk of burns.

8312 - Replacement of the starter ring gear Engines OM 364, 366, 366 A/LA, EURO I

2 Heat new starter ring gear to 250°C to 280°C and press on.

Risk of burns.

Note

The starter ring gear must be pressed on until it abuts the flywheel and must be sunk. The maximum lateral runout of the pressed on starter ring gear of 0.5 mm must not be exceeded.

8312 - Replacement of the starter ring gear Engines OM 364, 366, 366 A/LA, EURO I

3 On engines with a hole circle diameter for mounting the clutch of 410 mm, the starter ring gear must be drilled after installing and provided with M101.5 threads.

Note

Grease starter ring gear with longlife grease before operating.

Odkazované dokumenty